製品ラインナップ

Ideal for high-cycle thin hoop molding

Electric vertical injection molding machine TH-EⅢ Series is ideal for high-cycle thin hoop molding. It offers the advantages of energy-saving clean operation of electric type machines backed by Nissei’s abundant experience in time-tested hydraulic type vertical machines.


  • ELECTRIC VERTICAL INJECTION TH20EⅢ [Single-stage type]


    Models TH20EⅢ
    Specification item 2VE
    Screw diameter mm 16 19
    Injection capacity 13 18
    Max. injection pressure MPa 255 196
    Clamping force kN 196
    Clamping stroke mm 200
    Mold thickness (min.-max.) mm 170〜270
    Max. daylight opening mm 470
    Tie bar clearance(H×V) mm 310×310
    Die plate dimensions (H×V) mm 460×460
    Ejector stroke mm 40

    ELECTRIC VERTICAL INJECTION TH40EⅢ [Single-stage type]


    Models TH40EⅢ
    Specification item 5VE
    Screw diameter mm 19 22 26
    Injection capacity 23 35 49
    Max. injection pressure MPa 196 255 196
    Clamping force kN 392
    Clamping stroke mm 240
    Mold thickness (min.-max.) mm 190〜290
    Max. daylight opening mm 530
    Tie bar clearance(H×V) mm 360×360
    Die plate dimensions (H×V) mm 520×520
    Ejector stroke mm 40

    ELECTRIC VERTICAL INJECTION TH70EⅢ [Single-stage type]


    Models TH70EⅢ
    Specification item 5VE 9VE
    Screw diameter mm 19 22 26 28 32
    Injection capacity 23 35 49 69 90
    Max. injection pressure MPa 265 255 196 243 186
    Clamping force kN 686(784) 686(784)
    Clamping stroke mm 250 250
    Mold thickness (min.-max.) mm 230 ~ 350 230 ~ 350
    Max. daylight opening mm 600 600
    Tie bar clearance(H×V) mm 420 × 420 420 × 420
    Die plate dimensions (H×V) mm 607 × 607 607 × 607
    Ejector stroke mm 60 60

pagetop